Fortinet FortiOS policy examples
Rules for FortiGate firewalls running FortiOS, one page per topic. Every rule has a passing config and a failing config, with the result rConfig gives for each. Run the rules against the output of show full-configuration.
| Topic | What the rules check | Rules |
|---|---|---|
| Management access | A 10 minute admin timeout, no Telnet, HTTP, rsh or rexec on any interface, strong crypto, a pre-login banner | 4 |
| AAA and password policy | A RADIUS server with an address, a password policy with a minimum length of 12 | 2 |
| SNMP | No SNMPv1 or v2c communities, SHA and AES for every SNMPv3 user | 2 |
| Logging | Remote syslog on UDP port 514, a syslog severity of information or notice | 2 |
| Operational standards | Your NTP, syslog and DNS servers, a pre-login banner, interface descriptions, a hostname pattern, an SNMP location | 7 |
Where the examples come from
Every topic documents one file from the Fortinet FortiOS policy templates at release v1.5.0, which you can import into rConfig. The configs are sanitised excerpts of the sample configs that come with the templates. Where no sample fails a rule, the failing config is a sample excerpt with one line changed, and the page says which line. Every config shown was run through rConfig Pro’s evaluator with its rule, and gave the result shown.
The framework files (NIST, HIPAA and ISO/IEC 27001) collect these same rules, so they have no pages of their own here. See compliance frameworks.
If you are new to policy definitions, start with your first policy.