Skip to content
Guides & References

MikroTik RouterOS policy templates

The MikroTik RouterOS build template in rconfig/pro-policy-definitions v1.5.0: what each rule checks and its minimum version.

Policy LibraryUpdated
On this page

MikroTik RouterOS policy templates

Policy templates for MikroTik RouterOS, from the mikrotik/ folder. They check the configuration as returned by /export, where each section line (for example /ip service) is followed by its set or add lines. This page documents release v1.5.0. See importing a policy template to load one into rConfig.

For worked examples of these rules, with a passing and a failing config for each, see the MikroTik RouterOS platform pages.

Build templates

RouterOS build template

pro-policy-definitions / mikrotik /routeros-build-template.policyView on GitHub
Kind
Build template
Rules
10
Minimum rConfig
8.3.0
Release
v1.5.0

Starting template for a new RouterOS build, not a compliance check: identity, timezone, service lockdown, LAN bridge, DHCP, DNS, NAT, firewall filter, NTP and remote logging. Replace the example values (for example 192.168.88.0/24 and Europe/Dublin) with your own before use.

Every rule uses example values, so most rules fail against the sample until they are edited. Each rule matches lines in /export form: the section line, then a set or add line in that section with the given arguments in any order.

Rule Method What it checks
Identity is set (/system identity, set name=) evaluate_block Under /system identity, a set line has a name= value. Any name passes.
Timezone is Europe/Dublin (/system clock, set time-zone-name=Europe/Dublin) evaluate_block Under /system clock, a set line has time-zone-name=Europe/Dublin.
Telnet, FTP, www, www-ssl, API and API-SSL services are disabled and SSH strong crypto is on evaluate_block Under /ip service, each of telnet, ftp, www, www-ssl, api and api-ssl has its own set ... disabled=yes line, and under /ip ssh a set line has strong-crypto=yes.
LAN bridge bridge1 holds ether1 and has a /24 address evaluate_block There is an add name=bridge1 under /interface bridge, ether1 is added to bridge1 under /interface bridge port, and bridge1 has a /24 address under /ip address.
DHCP server dhcp1 on bridge1 uses pool dhcp_pool (.10 to .254) and a /24 network with a .1 gateway evaluate_block There is a dhcp_pool pool with a .10 to .254 range, a dhcp1 server on bridge1 using that pool, and a /24 DHCP network with a .1 gateway.
DNS servers are 8.8.8.8 and 8.8.4.4 with remote requests allowed (/ip dns) evaluate_block Under /ip dns, a set line has servers=8.8.8.8,8.8.4.4 and allow-remote-requests=yes.
Source NAT masquerades out ether1 (/ip firewall nat) evaluate_block Under /ip firewall nat, an add line has action=masquerade, chain=srcnat and out-interface=ether1.
Input and forward firewall filter rules accept established, related and LAN traffic and drop the rest evaluate_block Under /ip firewall filter, all nine add lines are present: accept established and related, drop invalid, accept ICMP and LAN on input, then drop; and the matching forward rules ending in a drop.
NTP client is enabled with servers 216.239.35.0 and 216.239.36.0 (RouterOS 6 or 7 form) evaluate_block Either the RouterOS 6 form (one set enabled=yes line with primary-ntp and secondary-ntp) or the RouterOS 7 form (set enabled=yes, then one add address= per server under /system ntp client servers).
Info, warning and error topics log to a remote action at 192.168.88.2 (/system logging) evaluate_block Under /system logging action, an action has remote=192.168.88.2, and under /system logging the info, warning and error topics each go to action=remote.

Known limitations

  • Each rule matches lines in /export form: the section line (for example /ip service), then a set or add line in that section with the given arguments in any order. Long lines that /export wraps with \ are matched across the break.
  • To edit a value, change it inside the regex and keep the escaping: / is written \/ and . is written \., for example time-zone-name=Europe\/Dublin.
  • The two catch-all drop rules (add action=drop chain=input and add action=drop chain=forward) must match the whole line, so a drop rule with other arguments does not satisfy them.

Type to search.