Skip to content
Guides & References

IP Infusion OcNOS policy examples

Worked rConfig policy examples for IP Infusion OcNOS, one page per topic, with a passing and failing config for every rule, checked with rConfig Pro.

Policy LibraryUpdated
Platform
ip-infusion-ocnos
On this page

IP Infusion OcNOS policy examples

Rules for routers running IP Infusion OcNOS, one page per topic. Every rule has a passing config and a failing config, with the result rConfig gives for each. Run the rules against the output of show running-config.

Topic What the rules check Rules
Management access No Telnet, SSH on the management VRF, a custom login banner 3
AAA Login through a TACACS+ or RADIUS server group, a TACACS+ server with a key 2
SNMP No SNMPv1 or v2c communities 1
Logging A remote syslog server, log timestamps not set to seconds or none 2
Services NTP authentication with a trusted key, password encryption 2
Operational standards Your NTP and syslog servers, a hostname pattern, an SNMP location 4

Where the examples come from

Every topic documents one file from the IP Infusion OcNOS policy templates at release v1.5.0, which you can import into rConfig. The configs are excerpts of two sample configs that come with the templates: the show running-config of an OcNOS-SP 7.0.0 router (a UfiSpace S9510-28DC-B) with its addresses, AS number and SNMP community sanitised, and a copy of it edited by hand to pass every rule. Where no sample fails a rule, the failing config is an excerpt with one line changed, and the page says which line. Every config shown was run through rConfig Pro’s evaluator with its rule, and gave the result shown.

The rules were written for OcNOS-SP. They have not been tried on the OcNOS-DC edition.

The framework files (NIST, HIPAA and ISO/IEC 27001) collect these same rules, so they have no pages of their own here. See compliance frameworks.

If you are new to policy definitions, start with your first policy.

Type to search.